Pay
A single transaction to authorise the payment and transfer funds from the payer's account to your account.
For card payments, Pay is a mode where the Authorize and Capture operations are completed at the same time. Pay is the most common type of payment model used by merchants to accept card payments. The Pay model is used when the merchant is allowed to bill the cardholder's account immediately, for example when providing services or goods on the spot.
Authentication Copied to clipboard
This operation requires authentication via one of the following methods:
- Certificate authentication.
-
To authenticate to the API two additional NVP parameters must be supplied in the request.
Provide 'merchant.
<your gateway merchant ID>
' in the apiUsername field and your API password in the apiPassword field.
Request Copied to clipboard
Fields Copied to clipboard
OPTIONAL
Additional details for account funding transactions (order.purchaseType=ACCOUNT_FUNDING).
Account funding transactions are transactions that pull money from the sender's card account for the purpose of funding another account, the recipient's account. Depending on the type of account funding transaction you may be required to provide some or all the details in this parameter group.
Enumeration
OPTIONAL
Defines the purpose of the account funding payment.If not provided the value is defaulted to OTHER.
Value must be a member of the following list. The values are case sensitive.
CRYPTOCURRENCY_PURCHASE
The funds from this account funding transaction will exclusively be used to purchase cryptocurrency.
MERCHANT_SETTLEMENT
The funds from this account funding transaction will be used to settle the proceeds of processing card transactions.
OTHER
The funds from this account funding transaction will be used for any other purpose, e.g. transferring funds from a person to a person or transferring funds into a staged wallet. This is the default value.
PAYROLL
The funds from this account funding transaction will be used to pay salaries.
OPTIONAL
Details about the recipient who will subsequently receive the funds that you are debiting from the sender in this transaction.
OPTIONAL
Details about the account of recipient who will subsequently receive the funds that you are debiting from the sender in this transaction.
Enumeration
OPTIONAL
If the recipient account type is an account with an associated card (accountFunding.recipient.account.identifierType=CARD_NUMBER) you must specify the funding method of the card.
If not provided the value is defaulted to UNKNOWN.
Value must be a member of the following list. The values are case sensitive.
CHARGE
The payer has a line of credit with the issuer which must be paid off monthly.
CREDIT
The payer has a revolving line of credit with the issuer.
DEBIT
Funds are immediately debited from the payer's account with the issuer.
UNKNOWN
The account funding method is not known. This is the default value.
String
OPTIONAL
The account identifier for the payment recipient's account.
For example, this may be a card number or bank account number. You must specify the type of identifier in field accountFunding.recipient.account.identifierType. In the response, the value will be masked. The masking format depends on the type of account identifier.
Data can consist of any characters
Enumeration
OPTIONAL
Defines the type of the recipient's account identifier that you have provided in field accountFunding.recipient.account.identifier.
If not provided the value is defaulted to OTHER.
Value must be a member of the following list. The values are case sensitive.
BANK_ACCOUNT_BIC
The recipient's account identifier is a bank account number and Business Identifier Code (BIC).
BANK_ACCOUNT_IBAN
The recipient's account identifier is an International Bank Account Number (IBAN).
BANK_ACCOUNT_NATIONAL
The recipient's account identifier is a bank account number and a national bank identifier, for example, a routing number (RTN).
CARD_NUMBER
The recipient's account identifier is a card number.
EMAIL_ADDRESS
The recipient's account identifier is an email address.
OTHER
The recipient's account identifier type can not be classified using any of the other categories. This is the default value
PHONE_NUMBER
The recipient's account identifier is a phone number.
SOCIAL_NETWORK_PROFILE_ID
The recipient's account identifier is a social network profile ID.
STAGED_WALLET_USER_ID
The recipient's account identifier is a user ID for a staged digital wallet. For a staged wallet, when the payer makes a payment using the wallet, the funds are pulled from an account associated with the wallet (first stage) before they are credited to the recipient of the wallet payment (second stage).
STORED_VALUE_WALLET_USER_ID
The recipient's account identifier is a user ID for a stored value wallet. A stored value wallet requires the payer to preload the wallet with funds before they can use the wallet to make a payment.
OPTIONAL
Details of the recipient's address.
String
OPTIONAL
The city portion of the address.
Data can consist of any characters
Upper case alphabetic text
OPTIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
String
OPTIONAL
The post code or zip code of the address.
Data can consist of any characters
String
OPTIONAL
The second part of the ISO 3166-2 country subdivision code for the state or province of the address.
For an address in the United States provide the 2-letter ISO 3166-2 state code. For US military bases provide one of AE, AA, AP. For an address in Canada provide the 2-letter ISO 3166-2 province code.
Data can consist of any characters
String
OPTIONAL
The first line of the address.
Data can consist of any characters
String
OPTIONAL
The second line of the address.
Data can consist of any characters
String
OPTIONAL
First name of the recipient.
Data can consist of any characters
OPTIONAL
Identification of the recipient.
Upper case alphabetic text
OPTIONAL
The ISO 3166 three-letter country code of the issuer of the identification.
Data must consist of the characters A-Z
Enumeration
OPTIONAL
The type of identification provided for the recipient.
Value must be a member of the following list. The values are case sensitive.
ALIEN_REGISTRATION_NUMBER
The recipient's identification type is an alien registration number issued by U.S. Citizenship and Immigration Services (USCIS) to immigrants who apply to live in the United States.
BUSINESS_TAX_ID
The recipient's identification type is a business tax id which is assigned to the business entity by the tax department.
COMPANY_REGISTRATION_NUMBER
The recipient's identification type is a company registration number which is issued to the company at the time of its incorporation.
CUSTOMER_IDENTIFICATION
The recipient's identification type is an unspecified form of customer identification through which the recipient can be identified and verified.
DATE_OF_BIRTH
The recipient's identification type is date of birth.
DRIVERS_LICENSE
The recipient's identification type is a driving license.
EMAIL
The recipient's identification type is an email address.
GOVERNMENT_ISSUED
The recipient's identification type is government issued.
INDIVIDUAL_TAX_ID
The recipient's identification type is an individual tax id which is assigned to the individual by the tax department.
LAW_ENFORCEMENT_IDENTIFICATION
The recipient's identification type is a law enforcement identification.
MILITARY_IDENTIFICATION
The recipient's identification type is a military identification which is issued by the department of defense and military.
NATIONAL_IDENTIFICATION_CARD
The recipient's identification type is a national identification card issued by the recipient's country.
OTHER
The recipient's identification type cannot be classified using any of the other categories. This is the default value.
PASSPORT
The recipient's identification type is a passport.
PHONE_NUMBER
The recipient's identification type is a phone number.
PROXY_IDENTIFICATION
The recipient's identification type is a proxy identification.
SOCIAL_SECURITY_NUMBER
The recipient's identification type is a social security number issued by Social Security Administration (SSA) to U.S. citizens, permanent residents and eligible non-immigrant workers in the United States.
TRAVEL_IDENTIFICATION
The recipient's identification type is a travel document other than a passport.
String
OPTIONAL
The identification value/number for the type of identification provided in accountFunding.recipient.identification.type.
Data can consist of any characters
String
OPTIONAL
Last name of the recipient.
Data can consist of any characters
String
OPTIONAL
Middle name of the recipient.
Data can consist of any characters
Boolean
OPTIONAL
Defines if the sender and recipient of the account funding payment are the same or not.
If not provided the value is defaulted to FALSE.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Enumeration
OPTIONAL
Defines if the sender is a person, a commercial organization, a non-profit organization or a government
Value must be a member of the following list. The values are case sensitive.
COMMERCIAL_ORGANIZATION
The sender is a commercial organization. Examples include account to account transfers initiated by a commercial organization for the purpose of transferring funds to one of their accounts, business to business payments, and disbursements for insurance claims, payroll, investment dividends, merchant rebates.
GOVERNMENT
The sender is a government or government agency. Examples include government agencies paying salaries, pensions, social benefits or tax credits.
NON_PROFIT_ORGANIZATION
The sender is a non-profit organization. Examples include non-profit organizations delivering emergency aid payments.
PERSON
The sender is a person. Examples include account to account transfers initiated by a person to their own account or a different person's account and adding funds to a staged wallet.
OPTIONAL
A commercial agreement you have with the payer that allows you to store and use their payment details for later payments.
For example, an agreement to a series of recurring payments (a mobile phone subscription), an agreement to take payment for a purchase by a series of installments (hire purchase), an agreement to make additional payments when required (account top up), or to fulfil a standard industry practice (no show penalty charge).
Do not provide this parameter group if you are storing the payment details for subsequent payer-initiated payments only.
See Credential on File, Cardholder, and Merchant Initiated Transactions for details.
Enumeration
OPTIONAL
Indicates if all the payments within the agreement use the same amount or if the amount differs between the payments.
The field must be provided for recurring payment agreements.
Value must be a member of the following list. The values are case sensitive.
FIXED
All payments in the recurring payment agreement have the same amount. Examples include magazine subscriptions or gym memberships.
VARIABLE
The amount for the payments within the recurring payment agreement differs between payments. Examples include usage-based charges like utility or phone bills.
String
OPTIONAL
Additional information requested for the agreement which cannot be passed using other available data fields.
This field must not contain sensitive data.
Data can consist of any characters, but sensitive data will be rejected
Date
OPTIONAL
Date at which your agreement with the payer to process payments expires.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
OPTIONAL
Your identifier for the agreement you have with the payer to process payments.
When you collect cards from your payers and store them for later use, you must provide an agreement ID when you use the stored values for:
- Recurring payments: you have an agreement with the payer that authorizes you to automatically debit their account at agreed intervals for fixed or variable amounts. For example, gym membership, phone bills, or magazine subscriptions.
- Installment payments: you have an agreement with the payer that authorizes you to process multiple payments over an agreed period of time for a single purchase. For example, the payer purchases an item for $1000 and pays for it in four monthly installments.
- Unscheduled: you have an agreement with the payer that authorizes you to process future payments when required. For example, the payer authorizes you to process an account top-up transaction for a transit card when the account balance drops below a certain threshold.
- Industry Practice: you have an agreement with the payer that authorizes you to initiate additional transactions to fulfil a standard business practice related to an original payment initiated by the payer. For example, a delayed charge for use of the hotel mini bar after the payer has checked out or a no show penalty charge when the payer fails to show for a booking.
Data can consist of any characters
Decimal
OPTIONAL
The maximum amount for a single payment in the series as agreed with the payer under your agreement with them.
The amount must be provided in the currency of the order.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Decimal
OPTIONAL
The minimum amount for a single payment in the series as agreed with the payer under your agreement with them.
The amount must be provided in the currency of the order.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Integer
OPTIONAL
The minimum number of days between payments agreed with the payer under your agreement with them.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Integer
OPTIONAL
The number of merchant-initiated payments within the recurring payment agreement.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Enumeration
OPTIONAL
The frequency of the payments within the series as agreed with the payer under your agreement with them.
Value must be a member of the following list. The values are case sensitive.
AD_HOC
The agreement if for payments on an ah-hoc basis.
DAILY
The agreement if for a daily payment.
FORTNIGHTLY
The agreement if for a fortnightly payment.
MONTHLY
The agreement if for a monthly payment.
OTHER
The agreement is for payments according to a schedule other than the ones listed in the other enumeration values for this field.
QUARTERLY
The agreement if for a quarterly payment.
TWICE_YEARLY
The agreement if for a payment twice a year.
WEEKLY
The agreement if for a weekly payment.
YEARLY
The agreement if for a yearly payment.
OPTIONAL
For an installment agreement where the payer purchased goods and/or services from a retailer but entered an installment agreement to pay for this purchase with you, you must provide details about the retailer.
String
OPTIONAL
Provide an abbreviation of the retailer's trading name that can be used by the issuer to indicate the retailer on the payer's statement.
Data can consist of any characters
String
OPTIONAL
A 4-digit code used to classify the retailer's business by the type of goods or services it offers.
Data can consist of any characters
String
OPTIONAL
The retailer's trading name.
Data can consist of any characters
Date
OPTIONAL
This is the effective start date for the payment agreement.
Cannot be in the past.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Enumeration
OPTIONAL
The type of commercial agreement that the payer has with you.
Specify the agreement type when you have provided a value for agreement.id and this payment is the first in a series of payments. The default value is OTHER.
The gateway will use the value you specify for subsequent payments in the series.
Value must be a member of the following list. The values are case sensitive.
INSTALLMENT
An agreement where the payer authorizes the payment for a single purchase to be split into a number of payments processed at agreed intervals. For example, pay for a purchase in six monthly installments.
OTHER
An agreement where you want to link related payments for any purpose other than processing recurring, installment, or unscheduled payments. For example, split tender payments.
RECURRING
An agreement where the payer authorizes you to process repeat payments for bills or invoices at agreed intervals (for example, weekly, monthly). The amount might be fixed or variable.
UNSCHEDULED
An agreement where the payer authorizes you to automatically deduct funds for a payment for an agreed purchase when required (unscheduled). For example, auto top-ups when the account value falls below a threshold.
OPTIONAL
Airline industry specific data.
Alphanumeric
OPTIONAL
The record locator used to access a specific Passenger Name Record (PNR).
PNR is a record in the database of a booking system that contains the itinerary for a passenger, or a group of passengers traveling together.
Data may consist of the characters 0-9, a-z, A-Z
Enumeration
OPTIONAL
The type of charge associated with the transaction.
Document Type Code
Value must be a member of the following list. The values are case sensitive.
ADDITIONAL_COLLECTION
Additional Collection
AGENCY_EXCHANGE_ORDER
Agency Exchange Order
AGENCY_GROUP_TICKET
Agency Group Ticket
AGENCY_MISCELLANEOUS_CHARGE_ORDER
Agency Misc. Charge Order (MCO)
AGENCY_PASSENGER_TICKET
Agency Passenger Ticket
AGENCY_TOUR_ORDER_OR_VOUCHER
Agency Tour Order/Voucher
AIR_FREIGHT
SPD/Air Freight
ANIMAL_TRANSPORTATION_CHARGE
Animal Transportation Charge
CATALOGUE_MERCHANDISE_ORDERED
Catalogue Merchandise Ordered
CLUB_MEMBERSHIP_FEE
Club Membership Fee
COUPON_BOOK
Coupon Book
CREDIT_CLASS_SERVICE_ADJUSTMENT
Credit Class of Service Adjustment
CREDIT_DENIED_BOARDING
Credit Denied Boarding
CREDIT_EXCHANGE_REFUND
Credit Exchange Refund
CREDIT_LOST_TICKET_REFUND
Credit Lost Ticket Refund
CREDIT_MISCELLANEOUS_REFUND
Credit Misc. Refund
CREDIT_MULTIPLE_UNUSED_TICKETS
Credit Multiple Unused Tickets
CREDIT_OVERCHARGE_ADJUSTMENT
Credit Overcharge Adjustment
CREDIT_UNUSED_TRANSPORTATION
Credit Unused Transportation
DEBT_ADJUSTMENT_DUPLICATE_REFUND_OR_USE
Debt Adjustment Duplicate Refund/Use
DUTY_FREE_SALE
Duty Free Sale
EXCESS_BAGGAGE
Excess Baggage
EXCHANGE_ADJUSTMENT
Exchange Adjustment
EXCHANGE_ORDER
Exchange Order
FIREARMS_CASE
Firearms Case
FREQUENT_FLYER_FEE_OR_PURCHASE
Frequent Flyer Fee/Purchase
FREQUENT_FLYER_FULFILLMENT
Frequent Flyer Fulfillment
FREQUENT_FLYER_OVERNIGHT_DELIVERY_CHARGE
Frequent Flyer Overnight Delivery Charge
GROUP_TICKET
Group Ticket
IN_FLIGHT_ADJUSTMENT
In-flight Adjustment
IN_FLIGHT_CHARGES
In-flight Charges
IN_FLIGHT_DUTY_FREE_PURCHASE
In-flight Duty Free Purchase
IN_FLIGHT_MERCHANDISE_ORDERED
In-flight Merchandise Ordered
IN_FLIGHT_PHONE_CHARGES
In-flight Phone Charges
KENNEL_CHARGE
Kennel Charge
LOST_TICKET_APPLICATION
Lost Ticket Application
MISCELLANEOUS_CHARGE_ORDER_OR_PREPAID_TICKET_ADVICE
Misc. Charge Order (MCO) / Prepaid Ticket Auth.
MISCELLANEOUS_TAXES_FEES
Miscellaneous Tax(es) Fee(s)
PASSENGER_TICKET
Passenger Ticket
SELF_SERVICE_TICKETS
Self-Service Ticket(s)
SENIOR_CITIZEN_DISCOUNT_BOOKLETS
Senior Citizen Discount Booklets
SMALL_PACKAGE_DELIVERY
Small Package Delivery
SPECIAL_SERVICE_TICKET
Special Service Ticket
SUPPORTED_REFUND
Supported Refund
TICKET_BY_MAIL
Ticket by Mail
TOUR_DEPOSIT
Tour Deposit
TOUR_ORDER_VOUCHER
Tour Order Voucher
UNDERCHARGE_ADJUSTMENT
Undercharge Adjustment
UNSUPPORTED_REFUND
Unsupported Refund
UPGRADE_CHARGE
Upgrade Charge
VENDOR_REFUND_CREDIT
Vendor Refund Credit
VENDOR_SALE
Vendor Sale
OPTIONAL
Itinerary details
OPTIONAL
Travel leg details.
Regex
OPTIONAL
The 2-character IATA airline code or 3 digit accounting code or both of the airline carrier for the trip leg.
Data must match regex
Alphanumeric
OPTIONAL
The ticket containing the coupon for this leg for an itinerary with more than four trip legs.
Data may consist of the characters 0-9, a-z, A-Z
Alphanumeric
OPTIONAL
The coupon number on the ticket for the trip leg.
Each trip leg requires a separate coupon. The coupon within the series is identified by the coupon number.
Data may consist of the characters 0-9, a-z, A-Z
Upper case alphabetic text
OPTIONAL
The 3 character IATA airport code of the departure airport for the trip leg.
Data must consist of the characters A-Z
Date
OPTIONAL
Date of departure for the trip leg.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Decimal
OPTIONAL
Tax payable on departure for the trip leg.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Time
OPTIONAL
Departure time in local time for the departure airport for this trip leg.
Data must comply with ISO 8601 extended time formats, hh:mm[:ss]Z or hh:mm[:ss](+/-)hh[:mm]
Upper case alphabetic text
OPTIONAL
The 3 character IATA airport code for the destination airport for the trip leg.
Data must consist of the characters A-Z
Date
OPTIONAL
Arrival date in local time for the destination airport for this trip leg.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Time
OPTIONAL
Arrival time in local time for the destination airport for this trip leg.
Data must comply with ISO 8601 extended time formats, hh:mm[:ss]Z or hh:mm[:ss](+/-)hh[:mm]
Alphanumeric
OPTIONAL
Restrictions (e.g. non-refundable) or endorsements applicable to the trip leg.
Data may consist of the characters 0-9, a-z, A-Z
Alphanumeric
OPTIONAL
New ticket number issued when a ticket is exchanged for the trip leg.
Data may consist of the characters 0-9, a-z, A-Z
Decimal
OPTIONAL
Total fare payable for the trip leg.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Alphanumeric
OPTIONAL
Code defining the rules forming the basis of the fare (type of fare, class entitlement, etc.)
Data may consist of the characters 0-9, a-z, A-Z
Decimal
OPTIONAL
Total fees payable for the trip leg.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Alphanumeric
OPTIONAL
The flight number for the trip leg.
Data may consist of the characters 0-9, a-z, A-Z
Boolean
OPTIONAL
Indicates if a stopover is permitted for the trip leg.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Decimal
OPTIONAL
Total taxes payable for the trip leg.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Alphanumeric
OPTIONAL
The industry code indicating the class of service (e.g. Business, Coach) for the leg.
Data may consist of the characters 0-9, a-z, A-Z
Digits
OPTIONAL
Number of passengers associated with this booking.
Data is a string that consists of the characters 0-9.
Upper case alphabetic text
OPTIONAL
The 3 character ISO 3166-1 alpha-3 country code of the country of origin for the itinerary.
Data must consist of the characters A-Z
OPTIONAL
Passenger details
String
OPTIONAL
First name of the passenger to whom the ticket is being issued.
Data can consist of any characters
String
OPTIONAL
Frequent Flyer or Loyalty Program number for this passenger.
Data can consist of any characters
String
OPTIONAL
Last name of the passenger to whom the ticket is being issued.
Data can consist of any characters
String
OPTIONAL
Middle name of the passenger to whom the ticket is being issued.
Data can consist of any characters
Alphanumeric
OPTIONAL
Passenger specific information recorded on the ticket.
Data may consist of the characters 0-9, a-z, A-Z
String
OPTIONAL
Title of the passenger to whom the ticket is being issued.
Data can consist of any characters
Alphanumeric
OPTIONAL
Plan number supplied by the airline for this booking.
Data may consist of the characters 0-9, a-z, A-Z
OPTIONAL
Ticket details
Boolean
OPTIONAL
Indicates if a conjunction ticket with additional coupons was issued.
Conjunction ticket refers to two or more tickets concurrently issued to a passenger and which together constitute a single contract of carriage.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Boolean
OPTIONAL
Indicates if an electronic ticket was issued.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Alphanumeric
OPTIONAL
The original ticket number when this is a transaction for an exchanged ticket.
Data may consist of the characters 0-9, a-z, A-Z
OPTIONAL
Ticket issue information.
String
OPTIONAL
The address where the ticket was issued.
Data can consist of any characters
Regex
OPTIONAL
The 2-character IATA airline code or 3 digit accounting code or both of the airline carrier issuing the ticket.
Data must match regex
Alphanumeric
OPTIONAL
Name of airline carrier issuing the ticket.
Data may consist of the characters 0-9, a-z, A-Z
String
OPTIONAL
The city/town where the ticket was issued.
Data can consist of any characters
Upper case alphabetic text
OPTIONAL
The 3 character ISO 3166-1 alpha-3 country code of the country where the ticket was issued.
Data must consist of the characters A-Z
Date
OPTIONAL
The date the ticket was issued.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
Alphanumeric
OPTIONAL
Industry code of the travel agent issuing the ticket.
Data may consist of the characters 0-9, a-z, A-Z
Alphanumeric
OPTIONAL
Name of the travel agent issuing the ticket.
Data may consist of the characters 0-9, a-z, A-Z
Boolean
OPTIONAL
Indicates if the issued ticket is refundable.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
OPTIONAL
Breakdown of the ticket taxes, airport taxes, charges and fees for an airline ticket purchase.
The total of the amounts in this group should equal the sum of the airline.ticket.totalFees and airline.ticket.totalTaxes fields.
Decimal
OPTIONAL
The tax, charge or fee amount payable.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Alphanumeric
OPTIONAL
The tax, charge or fee type code as assigned by IATA.
For example, the IATA tax/ charge/ fee type for Passenger Movement Charge (PMC) in Australia is TT1.
Data may consist of the characters 0-9, a-z, A-Z
Alphanumeric
OPTIONAL
The airline ticket number associated with the transaction.
Data may consist of the characters 0-9, a-z, A-Z
Decimal
OPTIONAL
Total fare for all trip legs on the ticket.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Decimal
OPTIONAL
Total fee for all trip legs on the ticket.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Decimal
OPTIONAL
Total taxes for all trip legs on the ticket.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Enumeration
OPTIONAL
The type of transaction performed against this airline booking.
Transaction Type
Value must be a member of the following list. The values are case sensitive.
EXCHANGE_TICKET
Exchange Ticket
MISCELLANEOUS_CHARGE
Miscellaneous Charge
REFUND
Refund
REVERSAL
Reversal
TICKET_PURCHASE
Ticket Purchase
TOUR_ORDER
Tour Order
String
= PAY
FIXED
Any sequence of zero or more unicode characters.
OPTIONAL
Information about how the payer's identity is verified.
For example, using 3-D Secure authentication.
This parameter group include payer authentication options available to you, parameters you need to perform payer authentication for an available method, and the results of payer authentication.
OPTIONAL
Information about payer authentication using 3-D Secure authentication.
Only provide these fields if you authenticated the payer using a different 3-D Secure service provider. If you authenticated the payer using the gateway, then provide authentication.transactionId instead.
Parameters in this group apply to both 3-D Secure authentication version 1 and 3-D Secure Authentication version 2.
Depending on the 3-D Secure authentication version applicable you will also need additional parameters:
- 3-D Secure authentication version 1: see the authentication.3ds1 parameter group.
- 3-D Secure authentication version 2: see the authentication.3ds2 parameter group.
Alphanumeric
OPTIONAL
Indicates the security level of the transaction.
This is the Electronic Commerce Indicator (ECI) value provided by the issuer's Access Control Server (ACS) to indicate the results of the attempt to authenticate the payer.
Data may consist of the characters 0-9, a-z, A-Z
Base64
OPTIONAL
The base64 encoded value generated by the issuer.
The authentication token Included in subsequent transaction request messages and used by the card scheme to verify that the authentication occurred and the values provided are valid. The token should be used unaltered.
For 3DS version 1, this field corresponds to the Cardholder Authentication Verification Value (CAVV) for Visa, the Accountholder Authentication Value (AAV) for MasterCard and JCB, or the American Express Verification Value (AEVV) for American Express.
For 3DS version 2, this field corresponds to the Authentication Value.
Data is Base64 encoded
String
OPTIONAL
A unique identifier for the 3-D Secure authentication transaction.
For 3DS version 1, this field corresponds to the XID. The XID is an identifier generated by the gateway on behalf of the merchant.
For 3DS version 2, this field corresponds to the identifier assigned by the scheme directory server.
This identifier should be used in subsequent operation requests unaltered.
An XID submitted in this field must be in base64 format.
Data can consist of any characters
OPTIONAL
Information about payer authentication using 3-D Secure authentication version 1.
Only provide these fields if you authenticated the payer using a different 3-D Secure service provider. If you authenticated the payer using the gateway, then provide authentication.transactionId instead.
Alpha
OPTIONAL
Indicates the result of payer authentication with the issuer.
This is the value returned in the transaction status field of the Payer Authentication Response (PARes) message from the card Issuer's Access Control Server (ACS). For example, Y, N, A, or U. Refer to the relevant documentation for Mastercard SecureCode™, Verified by Visa™, JCB J/Secure™, American Express SafeKey™, or Diners Club ProtectBuy™.
Data may consist of the characters a-z, A-Z
Alpha
OPTIONAL
Indicates whether or not payer authentication is available for the card number you provided.
This is for experts only - most users should use the response.gatewayRecommendation field.
This is the value returned in the 'enrolled' field of the Verify Enrollment Response (VERes) message from the card scheme's Directory Server. For example, Y, N, or U. Refer to the relevant documentation for Mastercard SecureCode™, Verified by Visa™, JCB J/Secure™, American Express SafeKey™, or Diners Club ProtectBuy™.
Data may consist of the characters a-z, A-Z
OPTIONAL
Information about payer authentication using 3-D Secure authentication version 2.
Only provide these fields if you authenticated the payer using a different 3-D Secure service provider. If you authenticated the payer using the gateway, then provide authentication.transactionId instead.
String
OPTIONAL
Reference number assigned to the issuer's Access Control Server (ACS) by EMV Co upon approval of the ACS.
This field corresponds to EMVCo field acsReferenceNumber.
Data can consist of any characters
String
OPTIONAL
A unique transaction identifier assigned by the Access Control Server to identify the 3DS transaction.
Data can consist of any characters
Enumeration
OPTIONAL
The EMV 3DS authentication scheme that was used to process the authentication request.
You must provide this field for co-branded card transactions that were authenticated outside MPGS using an external 3DS provider.
For example, for externally authenticated Mada co-branded transactions, you must provide either MADA, MASTERCARD or VISA to specify the 3DS directory server.
Value must be a member of the following list. The values are case sensitive.
AMEX
for American Express SafeKey EMV 3DS authentications
CARTE_BANCAIRE
for FAST'R by CB EMV 3DS authentications
DISCOVER
for Diners Club/Discover ProtectBuy EMV 3DS authentications
ITMX
for ITMX LSS EMV 3DS authentications
JCB
for JCB J/Secure EMV 3DS authentications
MADA
for mada secure EMV 3DS authentications
MASTERCARD
for Mastercard Identity Check EMV 3DS authentications
UNIONPAY
for UnionPay EMV 3DS authentications
VISA
for Visa Secure EMV 3DS authentications
JSON Text
OPTIONAL
Additional information returned by the scheme or issuer in the authentication response that must be included (together with the standard authentication details) when submitting the transaction for processing by the acquirer.
Data is valid Json Format
String
OPTIONAL
Reference number assigned to the Directory Server (DS) by EMV Co upon approval of the DS.
This field corresponds to EMVCo field dsReferenceNumber.
Data can consist of any characters
Alphanumeric + additional characters
OPTIONAL
The version of the EMV 3-D Secure protocol used to perform 3-D Secure authentication, in the format specified by EMVCo.
For example, 2.1.0
Data may consist of the characters 0-9, a-z, A-Z, '.'
String
OPTIONAL
A code indicating the reason for the transaction status returned in authentication.3ds2.transactionStatus.
Refer to the EMVCo specification for 3-D Secure.
Data can consist of any characters
Alpha
OPTIONAL
Indicates the result of payer authentication with the issuer.
This is the value returned in the transaction status field from the issuer's Access Control Server (ACS). For example, Y, N, U, A, R
Refer to the EMVCo specification for 3-D Secure.
Data may consist of the characters a-z, A-Z
Decimal
OPTIONAL
The amount for which the payer authentication has been performed.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
OPTIONAL
This parameter group is only applicable if you are subject to the Regulatory Technical Standards (RTS) requirements for Strong Customer Authentication (SCA) under the Payment Services Directive 2 (PSD2) regulations in the European Economic Area.
It provides details about SCA exemptions under PSD2.
Enumeration
OPTIONAL
Indicates why this payment qualifies for exemption from Strong Customer Authentication (SCA) under the Payment Services Directive 2 (PSD2).
Note:
- For recurring payments provide the RECURRING_PAYMENT value only if the amount is the same. If the amount varies, provide MERCHANT_INITIATED_TRANSACTION instead.
Value must be a member of the following list. The values are case sensitive.
AUTHENTICATION_OUTAGE
Allows the merchant to claim an exemption because authentication was not possible due to a technical outage.
AUTO
If either a LOW_RISK or LOW_VALUE_PAYMENT or TRUSTED_MERCHANT exemption applies to the transaction, it is automatically claimed by the gateway on behalf of the merchant.
LOW_RISK
Exemption is claimed because the acquirer has a low fraud rate.
LOW_VALUE_PAYMENT
Exemption is claimed as the amount is below 30 Euro.
MERCHANT_INITIATED_TRANSACTION
The transaction is excluded as it was initiated by the merchant based on an agreement with the payer. For example, a recurring payment (for a varied or fixed amount), installment payment, or account top-up. In these cases, the payer is not present and cannot participate in an authentication interaction. Merchant initiated transactions are only applicable to subsequent transactions on the order and are out of scope of the PSD2 RTS on Strong Customer Authentication (SCA). The payer must be authenticated during the first transaction that established the agreement.
NONE
An exemption is not claimed for this transaction. The merchant requires Strong Customer Authentication (SCA) be performed.
RECURRING_PAYMENT
The transaction is exempt as it was initiated by the merchant based on an agreement with the payer for a recurring payment for a fixed amount. This value is only applicable to subsequent transactions on the order. In this case, the payer is not present and cannot participate in an authentication interaction. The payer must be authenticated during the first transaction that established the agreement.
SECURE_CORPORATE_PAYMENT
The transaction is exempt as it is a corporate or Business-to-Business (B2B) payment performed using dedicated payment processes and protocols that are not available to consumers and offer at least equivalent security levels.
TRUSTED_MERCHANT
The transaction is exempt because the payer has added you to the list of their trusted merchants (as maintained by the issuer).
DateTime
OPTIONAL
Date and time of the payer authentication being performed.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
String
OPTIONAL
The transactionId you used for the Initiate Authentication operation.
Data can consist of any characters
OPTIONAL
Details of the payer's billing address.
OPTIONAL
The payer's billing address.
This data may be used to qualify for better interchange rates on corporate purchase card transactions.
String
OPTIONAL
The city portion of the address.
Data can consist of any characters
String
OPTIONAL
The name of the company associated with this address.
Data can consist of any characters
Upper case alphabetic text
OPTIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
Alphanumeric + additional characters
OPTIONAL
The post code or zip code of the address.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
String
OPTIONAL
The state or province of the address.
Data can consist of any characters
String
OPTIONAL
The three character ISO 3166-2 country subdivision code for the state or province of the address.
Providing this field might improve your payer experience for 3-D Secure payer authentication.
Data can consist of any characters
String
OPTIONAL
The first line of the address.
For example, this may be the street name and number, or the Post Office Box details.
Data can consist of any characters
String
OPTIONAL
The second line of the address (if provided).
Data can consist of any characters
OPTIONAL
Information about any constraints that apply to this transaction.
Specify constraints to ensure that the transaction conforms to predefined criteria. This is useful if your integration does not directly collect all the transaction values (e.g. a session-based integration or a checkout integration).
OPTIONAL
Information about the payment plan constraints which apply for this transaction.
Specify payment plan constraints to restrict the available payment plan options for this transaction.
Integer
OPTIONAL
The allowable number of deferral months for the payment plan.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
Integer
OPTIONAL
The allowable number of installments for the payment plan.
A number comprising the digits 0-9, having at least one digit. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#nonNegativeInteger.)
String
OPTIONAL
The identifiers for the payment plans supported for this transaction.
If you wish to offer any payment plans to the payer, provide the plan identifiers in this field else pass it as empty.
See Payment Plans for the supported payment plans and their identifiers.
Data can consist of any characters
String
OPTIONAL
A transient identifier for the request, that can be used to match the response to the request.
The value provided is not validated, does not persist in the gateway, and is returned as provided in the response to the request.
Data can consist of any characters
OPTIONAL
Cruise industry data.
String
OPTIONAL
The cruise booking reference.
Data can consist of any characters
OPTIONAL
Information about the cruise line.
OPTIONAL
Contact details of the cruise line.
Telephone Number
OPTIONAL
The cruise line registered office telephone number in ITU-T E123 format.
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
Telephone Number
OPTIONAL
The customer service phone number in ITU-T E123 format.
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
Date
OPTIONAL
The cruise departure/ sail date.
This field is required when cruise industry data is provided.
The value entered must be equal to or earlier than cruise.returnDate.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
OPTIONAL
A departurePort is the port where the passenger(s) boarded the cruise ship when the cruise trip started
OPTIONAL
Address of the cruise line.
String
OPTIONAL
The city portion of the address.
Data can consist of any characters
Upper case alphabetic text
OPTIONAL
The 3 letter ISO standard alpha country code of the address.
Data must consist of the characters A-Z
Alphanumeric + additional characters
OPTIONAL
The post code or zip code of the address.
Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'
String
OPTIONAL
The state or province code of the address.
The value must match the second part of the ISO 3166-2 code. For an address in the United States provide the 2-letter ISO 3166-2 state code. For US military bases provide one of AE, AA, AP. For an address in Canada provide the 2-letter ISO 3166-2 province code.
Data can consist of any characters
String
OPTIONAL
The first line of the address.
Data can consist of any characters
String
OPTIONAL
The second line of the address (if provided).
Data can consist of any characters
OPTIONAL
Cruise passenger details.
String
OPTIONAL
The first name of the passenger.
Data can consist of any characters
String
OPTIONAL
The folio number assigned to the passenger.
Data can consist of any characters
String
OPTIONAL
The last name of the passenger.
Data can consist of any characters
String
OPTIONAL
The middle name of the passenger.
Data can consist of any characters
String
OPTIONAL
The title of the passenger.
Data can consist of any characters
Date
OPTIONAL
The cruise return/ sail end date.
This field is required when cruise.departureDate is provided and the value must be equal to or later than cruise.departureDate.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
OPTIONAL
The name of the cruise ship.
Data can consist of any characters
Alphanumeric
OPTIONAL
The industry code of the travel agent booking the cruise.
Data may consist of the characters 0-9, a-z, A-Z
String
OPTIONAL
The name of the travel agent booking the cruise.
Data can consist of any characters
Comma separated enumeration
OPTIONAL
A comma separated list of the travel items that are included as part of a cruise travel package.
If the value CRUISE_ONLY is provided then other items are not permitted in the list.
Value must be one or more comma separated members of the following list. The values are case sensitive.
CAR_RENTAL
Car rental is included in the travel package.
CRUISE_ONLY
No additional items are included in the cruise travel package.
FLIGHT
Flights are included in the travel package.
OPTIONAL
Information specific to the use of dynamic currency conversion (DCC).
If you requested a rate quote via the gateway, provide the requestId as returned in the PAYMENT_OPTIONS_INQUIRY response. For rate quote requests performed outside the gateway, you must at least provide payer amount, payer currency, provider and payer exchange rate.
You can only provide DCC information on the initial transaction for an order.
If the initial transaction for an order is a payer authentication transaction with DCC information and the subsequent authorization or pay transaction contains different DCC information, that authorization or pay transaction will be rejected.
If DCC information is provided on subsequent capture or refund for an order, it will be ignored.
DateTime
OPTIONAL
The timestamp of when the conversion rate is effective.
The timestamp may need to be displayed to the payer on the merchant site to satisfy regulatory requirements.
An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"
Decimal
OPTIONAL
The foreign exchange markup applied as a percentage to the transaction amount for providing the conversion service.
The margin percentage may need to be displayed to the payer on the merchant site to satisfy regulatory requirements.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Decimal
OPTIONAL
The total amount of the transaction in the payer's currency.
You must include this field if the payer accepted the DCC offer you presented to them.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Upper case alphabetic text
OPTIONAL
The currency of the DCC rate quote provided by your DCC Service Provider.
The currency must be expressed as an ISO 4217 alpha code, e.g. USD and must be different to that provided for transaction currency. You must include this field if the payer accepted the DCC offer you presented to them.
Data must consist of the characters A-Z
Decimal
OPTIONAL
The exchange rate used to convert the transaction amount into the payer's currency.
The payer exchange rate includes the foreign exchange markup (marginPercentage). The payer exchange rate is displayed to the payer on the merchant site.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Enumeration
OPTIONAL
This identifies the name of the provider of the DCC quote.
Value must be a member of the following list. The values are case sensitive.
FEXCO
String
OPTIONAL
The quote provider's unique reference to the rate quote.
Data can consist of any characters
String
OPTIONAL
The unique identifier for your DCC quote request as returned in the PAYMENT_OPTIONS_INQUIRY response.
Data can consist of any characters
Enumeration
OPTIONAL
Indicates how DCC applies to the order.
If not provided, this value defaults to NOT_REQUIRED.
Value must be a member of the following list. The values are case sensitive.
ACCEPTED
The payer accepted the DCC offer and pays in their own currency. The conditions of the rate quote are applied in the processing of this transaction.
DECLINED
The payer declined the DCC offer and pays in your transaction currency.
NOT_AVAILABLE
A rate quote was requested, but no DCC offer was provided. For rate quotes via the gateway the PAYMENT_OPTION_INQUIRY response contains a currencyConversion.gatewayCode other than QUOTE_PROVIDED.
NOT_REQUIRED
DCC is not required for this transaction.
OPTIONAL
Information about the customer, including their contact details.
String
OPTIONAL
Your identifier for the payer's account with you.
This should be an immutable identifier, rather than the customer's name, email or such data that could be changed by the customer.
Data can consist of any characters
Email
OPTIONAL
The email address of the customer.
The field format restriction ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses.
Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses
String
OPTIONAL
The payer's first name.
Data can consist of any characters
OPTIONAL
Identification of the payer.
This information is used to identify the sender in account funding transactions.
Upper case alphabetic text
OPTIONAL
The ISO 3166 three-letter country code of the issuer of the identification.
Data must consist of the characters A-Z
Enumeration
OPTIONAL
The type of identification provided for the customer.
Value must be a member of the following list. The values are case sensitive.
ALIEN_REGISTRATION_NUMBER
The customer's identification type is an alien registration number issued by U.S. Citizenship and Immigration Services (USCIS) to immigrants who apply to live in the United States.
BUSINESS_TAX_ID
The customer's identification type is a business tax id which is assigned to the business entity by the tax department.
COMPANY_REGISTRATION_NUMBER
The customer's identification type is company registration number which is issued to the company at the time of its incorporation.
CUSTOMER_IDENTIFICATION
The customer's identification type is an unspecified form of customer identification through which the customer can identified and verified.
DATE_OF_BIRTH
The customer's identification type is date of birth.
DRIVERS_LICENSE
The customer's identification type is a driving license.
EMAIL
The customer's identification type is an email address.
GOVERNMENT_ISSUED
The customer's identification type is government issued.
INDIVIDUAL_TAX_ID
The customer's identification type is an individual tax id which is assigned to the individual by the tax department.
LAW_ENFORCEMENT_IDENTIFICATION
The customer's identification type is a law enforcement identification.
MILITARY_IDENTIFICATION
The customer's identification type is a military identification which is issued by the department of defense and military.
NATIONAL_IDENTIFICATION_CARD
The customer's identification type is a national identification card issued by the customer's country.
OTHER
The customer's identification type cannot be classified using any of the other categories. This is the default value.
PASSPORT
The customer's identification type is a passport.
PHONE_NUMBER
The customer's identification type is a phone number.
PROXY_IDENTIFICATION
The customer's identification type is proxy identification.
SOCIAL_SECURITY_NUMBER
The customer's identification type is a social security number issued by Social Security Administration (SSA) to U.S. citizens, permanent residents and eligible non-immigrant workers in United States.
TRAVEL_IDENTIFICATION
The customer's identification type is travel document other than a passport.
String
OPTIONAL
The identification value/number for the type of identification provided in customer.identification.type.
Data can consist of any characters
String
OPTIONAL
The payer's last or surname.
Data can consist of any characters
String
OPTIONAL
The payer's middle name.
Data can consist of any characters
Telephone Number
OPTIONAL
The payer's mobile phone or cell phone number in ITU-T E123 format, for example +1 607 1234 5678
The number consists of:
- '+'
- country code (1, 2 or 3 digits)
- 'space'
- national number ( which may embed single spaces characters for readability).
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
Telephone Number
OPTIONAL
The payer's phone number in ITU-T E123 format, for example +1 607 1234 456
The number consists of:
- '+'
- country code (1, 2 or 3 digits)
- 'space'
- national number ( which may embed single spaces characters for readability).
Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)
String
OPTIONAL
The tax registration identifier of the customer.
Data can consist of any characters
String
OPTIONAL
An identifier for the payer assigned by a government authority.
For example, in Mexico this could be the CURP (Clave Única de Registro de Población), RFC (Registro Federal del Contribuyente), or INE (Instituto Nacional Electoral) number. In Brazil this could be the CPF (Cadastro de Pessoas Físicas) or CNPJ (Cadastro Nacional de Pessoas Jurídicas).
Data can consist of any characters
OPTIONAL
Additional details for debt repayment transactions (order.purchaseType=DEBT_REPAYMENT).
If your Merchant Category Code is 6012 (Merchandise and Services—Customer Financial Institutions) or 6051 ( (Non-Financial Institutions – Foreign Currency, Non-Fiat Currency)) you may be required to provide some or all the details in this parameter group.
OPTIONAL
Details about the recipient of the payment and the destination account for the payment.
String
REQUIRED
The account identifier for the payment recipient's account.
For payments into a card account provide the card number. For payments into other accounts (for example a bank account) provide the account number. The value provided will be returned masked in the response.
Data can consist of any characters
Date
REQUIRED
The date of birth of the primary payment recipient in yyyy-mm-dd format.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd
String
REQUIRED
Last name of the primary payment recipient.
Data can consist of any characters
String
REQUIRED
Postcode of the primary payment recipient.
Data can consist of any characters
OPTIONAL
Information about the device used by the payer for this transaction.
String
OPTIONAL
The telephone number captured by ANI (Automatic Number Identification) when the customer calls to place the order.
Data can consist of any characters
String
OPTIONAL
The 2 digit ANI information identifier provided by the telephone company to indicate the call type, for example, cellular (61-63), toll free (24,25), etc.
Data can consist of any characters
String
OPTIONAL
The User-Agent header of the browser the customer used to place the order.
For example, MOZILLA/4.0 (COMPATIBLE; MSIE 5.0; WINDOWS 95)
Data can consist of any characters
String
OPTIONAL
Information collected about a remote computing device for the purpose of providing a unique identifier for the device.
For example, session ID, blackbox ID.
Data can consist of any characters
String
OPTIONAL
The name of the server to which the customer is connected.
Data can consist of any characters
String
OPTIONAL
The IP address of the device used by the payer, in IPv4 nnn.nnn.nnn.nnn format.
You can provide the IP address in IPv6 format as defined in RFC4291.
IPv6 address will only be used in EMV 3DS authentication. Supplied IPv6 address will not be used for any other purposes.
Data can consist of any characters
String
OPTIONAL
The mobile phone manufacturer's identifier for the model of the mobile device used to initiate the payment.
Data can consist of any characters
String
OPTIONAL
The person who initiated this transaction.
This field is automatically populated by the gateway if the transaction was created via Merchant Administration (gatewayEntryPoint=MERCHANT_ADMINISTRATION) or Merchant Manager (MERCHANT_MANAGER). In this case this is the name that the person used to log in to Merchant Administration or Merchant Manager respectively.
Data can consist of any characters
Alphanumeric + additional characters
REQUIRED
The unique identifier issued to you by your payment provider.
This identifier can be up to 12 characters in length.
Data may consist of the characters 0-9, a-z, A-Z, '-', '_'
REQUIRED
Information about the order associated with this transaction.
Boolean
OPTIONAL
Indicates whether you will accept a payment less than order.amount, e.g. when using a gift card.
If not set or set to FALSE, and the full amount is not available, the transaction will be rejected.
Unless you have been advised by your payment service provider that the gateway supports partial approvals for your acquirer, you can ignore this field.
If the gateway supports partial approvals for your acquirer you must set this field to TRUE else the transaction is rejected by the gateway.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Decimal
OPTIONAL
The total amount for the order. This is the net amount plus any merchant charge amounts.If you provide any sub-total amounts, then the sum of these amounts (order.itemAmount, order.taxAmount, order.shippingAndHandlingAmount, order.cashbackAmount, order.gratuityAmount, order.merchantCharge.amount and order.dutyAmount), minus the order.discountAmount must equal the net amount.
The value of this field in the response is zero if payer funds are not transferred.
Either Amount or netAmount must be provided
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Boolean
OPTIONAL
Set this flag if the transaction is a manual cash disbursement transaction, i.e. cash is disbursed upon the acceptance of a card by a financial institution teller.
The values 'true' or 'false'. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#boolean.)
Decimal
OPTIONAL
The amount the payer has chosen to receive as cash in addition to the amount they are paying for the goods or services they are purchasing from you.
The cash back amount is included in the total amount of the order you provide in order.amount.
This field corresponds to EMV tag 9F03
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Upper case alphabetic text
REQUIRED
The currency of the order expressed as an ISO 4217 alpha code, e.g. USD.
Data must consist of the characters A-Z
String
OPTIONAL
Information about this order that is of interest to you.
For example order.custom.X, where 'X' is defined by you and must be less than 100 characters from the set A-Z, a-z, 0-9. For example, order.custom.salesRegion. You can specify up to 50 such fields. They are not sent to acquirers.
Data can consist of any characters
String
OPTIONAL
A note from the payer about this order.
Data can consist of any characters
Date
OPTIONAL
The date the payer placed the order.
Data must comply with ISO 8601 extended date format, yyyy-mm-dd.
ASCII Text
OPTIONAL
The payer's own reference for the order.
This reference may assist the payer to identify the order in their system. For example, a purchase order number, project identifier, or cost center.
Data consists of ASCII characters
String
OPTIONAL
Short textual description of the contents of the order.
Data can consist of any characters
OPTIONAL
Information about a price reduction you have applied to the order.
For example, you may apply discounts for trade, employees, bulk purchase, or a sales promotion.
Decimal
OPTIONAL
The total amount of the discount you have applied to the order.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
String
OPTIONAL
The code you use to identify the reason for the discount.
Data can consist of any characters
String
OPTIONAL
A description of your reason for the discount.
Data can consist of any characters
Decimal
OPTIONAL
The duty amount (also known as customs tax, tariff or dues) for the order.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)
Decimal
OPTIONAL
The amount the payer has chosen to provide as a gratuity or tip in addition to the amount they are paying for the goods or services they are purchasing from you.
The gratuity amount is included in the total amount of the order you provide in order.amount.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Enumeration
OPTIONAL
This field is used to classify merchant initiated payments which are submitted in the context of certain industry practices.
Use this field to indicate the reason for that industry practice payment.
A merchant initiated industry practice transaction must also contain the 'scheme transaction Id' from the associated cardholder initiated transaction.
You can provide the referenceOrderId of the relevant cardholder initiated transaction and the gateway will include the 'scheme transaction Id' on the industry practice transaction. For example, when you submit a 'delayed charge', you should provide the referenceOrderId of the cardholder-initiated transaction that resulted in the delayed charge.
Alternatively, you can provide the 'scheme transaction Id' of the cardholder initiated transaction in the industry practice transaction using the field transaction.acquirer.traceId.
You must have obtained the payer's consent prior to submitting industry practice transactions.
Value must be a member of the following list. The values are case sensitive.
DELAYED_CHARGE
An additional payment processed in accordance with your terms and conditions after the original payment has been processed. For example, hotel mini bar charge after the payer has checked out or damage to a rental car.
NO_SHOW_PENALTY
A penalty charged in accordance with your charge cancellation policy the payer cancels or fails to show for the booking.
PARTIAL_SHIPMENT
A shipment where merchant decides to ship the goods from the same order in multiple shipments due to various reasons like goods availability, involvement of multiple suppliers for goods etc.
String
OPTIONAL
The invoice number you issued for this order.
Data can consist of any characters
String
OPTIONAL
Your tax registration identifier provided by the Local/State/Province tax authority.
If you are a Canadian merchant, use this field to provide your Tax Registration ID for paying Provincial Sales Tax (PST).
Data can consist of any characters
OPTIONAL
Use this parameter group to provide additional information if you are a marketplace.You are considered a marketplace if you operate an electronic commerce website or mobile application that brings together payers and retailers and you are selling the goods or services on behalf of the retailer.In this case, the card schemes may require you to register with them as a marketplace and assign you a Marketplace ID.
You should provide this identifier to your payment service provider so that the gateway can automatically include it in all transaction messages to your acquirer.
Enumeration
OPTIONAL
Provide information about the location of the retailers for goods or services included in this order.Where a retailer is located in a country different from your country, they are considered a foreign retailer, otherwise they are considered a domestic retailer.
Value must be a member of the following list. The values are case sensitive.
DOMESTIC_ONLY
The order only contains items from domestic retailers.
FOREIGN_AND_DOMESTIC
The order contains items from both foreign and domestic retailers.
FOREIGN_ONLY
The order only contains items from foreign retailers.
Digits
OPTIONAL
A 4-digit code used to classify your business by the type of goods or services it offers.This is also known as the Merchant Category Code (MCC).
You only need to provide the MCC if you want to override the default value configured for your acquirer link.The value you provide must match one of those configured by your payment service provider.
Data is a string that consists of the characters 0-9.
OPTIONAL
Information about additional fees that you are charging the payer for processing the payment for this order, for example, a surcharge.
Decimal
OPTIONAL
The amount of the additional fee that you are charging the payer.
If you provide a charge amount, you must include it in the total amount for the order.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Enumeration
REQUIRED
The type of the additional fee that you are charging the payer.
Value must be a member of the following list. The values are case sensitive.
SURCHARGE
A fee that covers your cost of accepting accepting a payment method.
Digits
OPTIONAL
The code that represents a partnership agreement, between you and the issuer.
Data is a string that consists of the characters 0-9.
Decimal
OPTIONAL
The amount payable for the order before merchant charge amount is applied.
If you specify a net amount the gateway will calculate the merchant charge amount for you based on the charge type (order.merchantCharge.type) provided in the request. Alternatively, you can specify the merchant charge amount (order.merchantCharge.amount) yourself.
Either Amount or netAmount must be provided
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Url
OPTIONAL
The URL to which the gateway will send Webhook notifications when an order is created or updated.
To receive notifications at this URL, you must enable Webhook notifications in Merchant Administration. Ensure the URL is HTTPS
Ensure that this is a valid URL according to RFC 1738.
String
OPTIONAL
Your identifier for the part of your organization that is responsible for the order.
You might provide this data when you want to track the accountability for the order. For example, store number, sales region, branch, or profit center
Data can consist of any characters
Enumeration
OPTIONAL
Indicates the purchase of specific types of goods or services.
You must provide a value if your Merchant Category Code (MCC) is one of the following:
6051 (Quasi Cash – Merchant or Non-Financial Institutions – Foreign Currency, Non-Fiat Currency) and this transaction is for the purchase of cryptocurrency. Set the value to CRYPTOCURRENCY.
6211 (Securities – Brokers/Dealers) and this transaction is for the purchase of high-risk securities. Set the value to HIGH_RISK_SECURITIES.
6012 (Merchandise and Services—Customer Financial Institutions) or 6051 (Non-Financial Institutions – Foreign Currency, Non-Fiat Currency) and this transaction is for debt repayment. Set the value to DEBT_REPAYMENT.
If the transaction pulls money from an account for the purpose of crediting another account you must set purchase type to ACCOUNT_FUNDING.
You may set purchase type to OTHER for any other type of payment.
Value must be a member of the following list. The values are case sensitive.
ACCOUNT_FUNDING
The transaction pulls money from an account for the purpose of crediting another account. You may be required to provide additional details about the account funding transaction in the accountFunding parameter group.
CRYPTOCURRENCY
The transaction is for the purchase of a cryptocurrency.
DEBT_REPAYMENT
You may be required to provide additional details about the debt repayment in the debtRepayment parameter group.
HIGH_RISK_SECURITIES
The transaction is for the purchase of high-risk securities.
OTHER
Use this value if the purchase type for the transaction does not fit in any of the other categories.
String
OPTIONAL
The identifier of the order.
For example, a shopping cart number, an order number, or an invoice number.
Data can consist of any characters
String
OPTIONAL
The name of the person who requested the goods or services.
Data can consist of any characters
OPTIONAL
Information about reward points earned using a card enrolled in a rewards program that are being redeemed as full or part payment for this order.
Decimal
OPTIONAL
The amount that the payer has chosen to pay by redeeming reward points earned using a card enrolled in a rewards program for full or part payment for this purchase.
The reward amount is included in the total amount of the order you provide in order.amount.You must provide this value if the rewards program supports a payer-nominated amount (availableBalance.reward.payerNominatedAmount returned from the Balance Inquiry operation has a value of 'true').
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Alphanumeric + additional characters
REQUIRED
An identifier generated by the gateway when you have requested the balance available for a credit or debit card.
The presence of this field indicates that rewards are to be redeemed.The gateway will use the details stored against this identifier when authorizing the payment with your acquirer.
Data may consist of the characters 0-9, a-z, A-Z, '-', '_', ' ', '&', '+', '!', '$', '%', '.', '='
Decimal
OPTIONAL
The total shipping and handling amount for the order, including taxes on the shipping and/or handling.
Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.
Decimal
OPTIONAL
The tax amount levied on the shipping and handling amount for the order.
This amount is included in the shipping and handling amount provided in field order.shippingAndHandlingAmount.
A sequence of digits 0-9 separated by a '.' as a decimal indicator. Leading and trailing zeroes are optional. If the fractional part is zero, the '.' and following zero(es) can be omitted. (For a complete description, see http://www.w3.org/TR/xmlschema-2/#decimal.)